Figure 1 Standard Hanger PN: 180-300 will fit forks up to 9" wide and 8-1/2" high. Figure 2 Loose Pin Shackle Shackles are hot dip galvanized for corrosion resistance. 4" Shackle PN: 175-230 6" Shackle PN: 175-260 Figure 3 Extra Shortening Eye Flat Pin Eye Slings connected to Fork Sling Hardware. Made in 4" and 6" widths. This type has shorter 6" long Pin Eyes. When extra eyes are not in use they stay out of the way. This type can also be connected or disconnected without pulling sling over the forks, however, the disconnect is a little higher to reach than Type 3.   Type 1 and 1F Type 2 Type 3 & 3F Extensions Sling only 4" One Ply 11,400 12,500 ----------- 11,400 4" Two Ply 25,000 25,000 12,500 each 25,000 6" One Ply 17,100 18,800 ----------- 17,100 6" Two Ply 34,200 34,200 17,100 each 34,200 NOTE: Type 3 & 3F capacities are for each extension.